PRO Print Paste Mix F: A
mixed formula in powder form
containing Urea, Thick F and Metaphos. Just add water. Use for Silk,
Nylon and Synthetics when fine line definition is
critical.
TO MIX 1 CUP OF PASTE:
Slowly add 55grams (5 1/2 level Tbl) of print paste mix to 1 cup
(8oz) of room temperature water (70'F to 90'F), while stirring. Continue
stirring until a smooth paste is obtained. Let stand overnight for
smoothest results.
TO MIX 1 QUART OF PASTE:
Slowly add 225 grams (1 1/3 cups) print paste mix to 1 quart (32oz) of
room temperature water (70'F to 90'F), while stirring. Continue stirring
until a smooth paste is obtained. Let stand overnight for smoothest
results.
* Store dry Print Paste Mix in an airtight container.
* Prepared Print Paste can be stored up to 6 months at room temperature
To thin Print Paste, add Urea water until desired consistency is obtained.
TO MAKE UREA WATER:
Add 3 Tbl Urea to 1 cup (8oz) warm water. Cool to room temperature
before using.
