C:\Website\PROsoft K.htm

PO Box 14 • Somerset, MA 02726
orders 1-800-2-BUY-DYE
technical support 508-676-3838
fax 508-676-3980
e-mail • promail@prochemical.com
www.prochemical.com

PROsoft K

Please read directions carefully before starting.

Remove the stiff and unyielding hand of just dyed fabric with this semipermanent fabric softener. It puts the soft hand back into cotton, silk and synthetic fabrics. It provides resistance to discoloration from heat treatments and aging and does not yellow over time. The amount of PROsoft K you need depends on the type of fiber you are treating. Always do a test sample before working on a large project. For additional information, visit our web site at www.prochemical.com

Wear rubber gloves, apron or old clothes.

All utensils used for dyeing should not be used for food preparation.

Avoid splashing, as it could be corrosive to the eye; wear eye protection.

Supplies
PROsoft K

Procedure
1. Measure the desired amount of PROsoft K according to the type of fabric, from the chart below. Put the PROsoft K into the fabric dispenser in your washing machine or during the last rinse OR in a pot if treating the fabric by hand. Rinse water should be 105E - 120EF (41E- 49EC).

	Cellulose Fabrics (Cotton, etc.)	Synthetic Fabrics
PROsoft K	2 to 4 tsp (10 - 20 ml)	1 to 2 tsp (5 - 10 ml)

2. Continue to rinse the fabric for 20 minutes. Extract excess water and air dry.